NEW FOR 2017!
Same day shipping for most of our products!

Steel Mount Boathouse Lifts for Pontoon boats with A-Drive hoist

"Go Here" To see our other Boathouse Lifts "Go Here" To see the home Page.

Boat Hoist USA introduces a lift kit for boat houses using steel.  The steel kits will fit any application using I-beam, channel or steel tubing as overhead beams.  All components are hot dipped galvanized and do not require welding or drilling by the installer

Steel Component Kits:
The components kit includes the hangers needed to hang the kit on existing overhead beams.
STEEL KITS INCLUDE:
  • Complete hoist matched for capacity
  • 1 unit hanger with built in pipe support
  • 1 dual pipe support
  • 4  3" or 4" ball bearing pulleys
  • 4  I-beam clamp pulleys hangers
  • 4  I-beam to channel clamps
  • 100' galvanized cable
  • 8   galvanized clamps
  • 4   galvanized thimbles
  • 1 set of 4" x 14' weighted slings or cradle
  • All mounting hardware
WHAT SIZE KIT DO I NEED?
When deciding the correct kit for your boat it is always a good idea to buy more lifting capacity than you need. In many cases the boat's weight is only the DRY weight and in some cases it does not include the engine.  If your boat weighs 4400 lbs, it would be wise to choose a 6000 lb lift.  If you have a cradle, you need to add at least 400 lbs. more to the lift.

GO HERE FOR A LARGER VIEW

GO HERE FOR A LARGER VIEW

GO HERE FOR A LARGER VIEW

SPPC-A 7000 Deluxe Steel Mount Pontoon Cradle Lift Kit with Enclosed Maintenance Free A-Drive hoist $2,309.00 **NEW**
7,000 lb Deluxe Steel Mount Single Line Cradle Lift Kit for Mounting pipe in center of Boat House  "Go here to compare our lifts"
Kit includes:

SSPPC-A 7000 Super Deluxe Steel Mount Pontoon Cradle Lift with Enclosed Maintenance Free A-Drive Hoist $2,999.00 **NEW**
85
00 lb Deluxe Single Line Cradle Lift Kit for Mounting pipe in center of Boat House "Go here to compare our lifts"

Kit includes:


Call: 318-987-3000, Text: 318-286-9169 or Email: info@BoatLifts4Less.com

Up-Grades and Options for Boat Hoist USA Boathouse Lifts

Stainless Steel Cable, Clamps and Thimbles (1/4" Cable) $85
Stainless Steel Cable, Clamps and Thimbles (5/16" Cable) $110
Upgrade to 22 inch bunk brackets from 16 inch $100
Galvanized Back Plate $19
Aluminum Back Plate (3500-4500 lb kits only) $28
Wired for 220volt with 220volt GFCI up-grade $28
GEM GR1 Remote for single motor $416
Spring Switch N/C
Front Hoist Cover with Stainless Hardware $75
Front and Back Hoist Cover with Stainless Hardware $100
Galvanized single HD Pipe Support $32
Galvanized Dual Pipe Support $72
Aluminum Cable Winders for 2 inch pipe. $35 each
Guide Posts for Cradle for 4 or 5 inch I-beams, set of 4
(Stanchion without PVC Pipe)
$125
Guide Posts for Cradle for 6 inch I-beams, set of 4
(Stanchion without PVC Pipe)
$125
36" Padded Guide post bumpers (Black, Blue or Red) $22
12" x 12' Black All Weather Bunk Carpet $17
6 lb Cable Weights $26 each
10 lb Cable Weights $39 each
Compounding Kit (not weighted) $180
Compounding Kit (weighted for sling kits) $305


Call: 318-987-3000, Text: 318-286-9169 or Email: info@BoatLifts4Less.com