Call or Text: 318-286-9169 Email: info@BoatLifts4Less.com
Monday thru Friday 9 to 5

WSPC 3000 Basic Sling Lift $1049.00  Call 318-286-9169 to order.
3000 lb Basic Single Line Sling Lift Kit For Mounting pipe in center of Boat House
Kit includes:

• BH-30 3000 lb Standard hoist (Click here for more) With enclosed worm gear and extended worm gear assembly to stop deflection. LIFE TIME WARRANTY (GPA)

• 2 foot per minute lift speed

• 2-Galvanized Single V Pipe Supports Upgrade to Galvanized Dual Pipe Supports (mounts lift on 3 joists instead of 5) for $160, the Eazy Mount pipe support/hoist hanger setup (mounts lift on 2 joists instead of 5) for $295 or Dual Pillow Block Pipe Supports with Pillow Blocks for $395.

• 4 Galvanized 1.5 ton pulleys with ball bearings and grease zerks Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.

• 4-12" Galvanized Strap Hangers

• 1 set 4"x14' (weighted) Polyester Slings Delete slings for a $120 deduction.

• 124 Foot of Pre-Cut Galvanized 1/4" cable

• 8 cable clamps and 4 thimbles

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

WSPS 3500 Deluxe Sling Lift $1,485.00 (Pipe on Side)  Call 318-286-9169 to order.
3500 lb Deluxe Single Line Sling Lift Kit (Pipe on Side) Great for boats with tops. "Go here to compare our lifts"
Deluxe Lift Kit includes:

• BH-35 3500 lb top of the line hoist (Click here for more) With enclosed worm gear and extended worm gear assembly to stop deflection. LIFE TIME WARRANTY (GPA)

• 2 foot per minute lift speed

• 2 Galvanized Dual Pipe supports for side mount.

• 2 12" Galvanized Strap Hangers

• 2 Galvanized 1.5 ton pulleys with ball bearings and grease zerks Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.

• 1 set of 4" x 14' Polyester (weighted) Boat Slings Delete slings for a $120 deduction.

• 124 Foot of Pre-Cut Galvanized 1/4" cable

• 8 cable clamps and 4 thimbles

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

WCPC 3500 Deluxe Cradle Lift $2,135.00 Call 318-286-9169 to order.
3500 lb Deluxe Single Line V-hull Cradle Lift Kit for Mounting pipe in center of Boat House "Go here to compare our lifts"

• BH-35 3500 lb top of the line hoist (Click here for more) With enclosed worm gear and extended worm gear assembly to stop deflection. LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• 2-Galvanized Heavy Duty Pipe Supports Upgrade to Galvanized Dual Pipe Supports (mounts lift on 3 joists instead of 5) for $155, the Eazy Mount pipe support/hoist hanger setup (mounts lift on 2 joists instead of 5) for $290 or Dual Pillow Block Pipe Supports with Pillow Blocks for $395.
• 4 Galvanized 1.5 Ton pulleys with ball bearings and grease zerk. Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 4 x 12" Galvanized Strap Hangers 
• 1 Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 7/16" 1.5 Ton Galvanized Shackles for easy Cradle Attachment
• 124 Foot of Pre-Cut Galvanized 1/4" cable
• 8 cable clamps and 4 thimbles

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

• BH-35 3500 lb top of the line hoist With enclosed worm gear and extended worm gear assembly to stop deflection. LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• 2 Galvanized Dual Pipe supports for side mount.
• 2 12" Galvanized Strap Hangers
• 2 Galvanized 1.5 ton pulleys with ball bearings and grease zerks Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 1 Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 7/16" 1.5 Ton Galvanized Shackles for easy Cradle Attachment.
• 124 Foot of Pre-Cut Galvanized 1/4" cable
• 8 drop forged cable clamps and 4 thimbles

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

WSPC 4500 Deluxe Sling Lift $1,325.00  Call 318-286-9169 to order.
4500 lb Deluxe Single Line Sling Lift Kit for Mounting pipe in center of Boat House "Go here to compare our lifts"
Kit includes:

• BH-45 4500 lb top of the line hoist With enclosed worm gear and extended worm gear assembly to stop deflection. 110 volt 1 HP Elite Motor with GFCI protection LIFE TIME WARRANTY (GPA)

• 2 foot per minute lift speed

• 2-Galvanized Heavy Duty Pipe Supports Upgrade to Galvanized Dual Pipe Supports (mounts lift on 3 joists instead of 5) for $145, the Eazy Mount pipe support/hoist hanger setup (mounts lift on 2 joists instead of 5) for $260 or Dual Pillow Block Pipe Supports with Pillow Blocks for $375.

• 4-Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.

• 4-12" Galvanized Strap Hangers 

• 1 set 4"x14' (weighted) Polyester Slings Delete slings for a $120 deduction.

• 124 Foot of Pre-Cut Galvanized 1/4" cable

• 8 drop forged cable clamps and 4 thimbles

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

• BH-45 4500 lb top of the line hoist With enclosed worm gear and extended worm gear assembly to stop deflection. 110 volt 1 HP Elite Motor with GFCI protection LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• 2 Galvanized Dual Pipe supports for side mount.
• 2 12" Galvanized Strap Hangers
• 2 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 1 set of 4" x 14' Polyester (weighted) Boat Slings Delete slings for a $120 deduction.
• 124 Foot of Pre-Cut Galvanized 1/4" cable
• 8 drop forged cable clamps and 4 thimbles

• 1 year warranty on electrical components

• .LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

WCPC 4500 Deluxe Cradle Lift $2,152.00 "Go here to compare our lifts" Call 318-286-9169 to order.
4500 lb Deluxe Single Line V-hull Cradle Lift Kit for Mounting pipe in center of Boat House

• BH-45 4500 lb top of the line hoist With enclosed worm gear and extended worm gear assembly to stop deflection. 110 volt 1 HP Elite Motor with GFCI protection LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• 2-Galvanized Heavy Duty Pipe Supports Upgrade to Galvanized Dual Pipe Supports (mounts lift on 3 joists instead of 5) for $155, the Eazy Mount pipe support/hoist hanger setup (mounts lift on 2 joists instead of 5) for $260 or Dual Pillow Block Pipe Supports with Pillow Blocks for $395.
• 4 Galvanized 1.5 Ton pulleys with ball bearings and grease zerk (straight line, NO COMPOUNDING "Click Here to learn about Compounding" ) Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 4-12"  Galvanized Strap Hangers 
• 1 Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 7/16" 1.5 Ton Galvanized Shackles for easy Cradle Attachment.
• 124 Foot of Pre-Cut Galvanized 1/4" cable
• 8 drop forged cable clamps and 4 thimbles

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

• BH-45 4500 lb top of the line hoist With enclosed worm gear and extended worm gear assembly to stop deflection. 110 volt 1 HP Elite Motor with GFCI protection LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• 2 Galvanized Dual Pipe supports for side mount.
• 2 12" Galvanized Strap Hangers
• 2 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 1 Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 7/16" 1.5 Ton Galvanized Shackles for easy Cradle Attachment
• 124 Foot of Pre-Cut Galvanized 1/4" cable
• 8 drop forged cable clamps and 4 thimbles

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

• BH-45 4500 lb top of the line hoist With enclosed worm gear and extended worm gear assembly to stop deflection. 110 volt 1 HP Elite Motor with GFCI protection LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• 2 Galvanized Dual Pipe supports for side mount.
• 2 12" Galvanized Strap Hangers
• 2 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 1 Galvanized Boat Cradle with end plates and 22 inch bunk board brackets for Inboard Ski Boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 7/16" 1.5 Ton Galvanized Shackles for easy Cradle Attachment.
• 124 Foot of Pre-Cut Galvanized 1/4" cable
• 8 drop forged cable clamps and 4 thimbles

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

WSPC 6500 Deluxe Sling Lift $ 1,499.00 Call 318-286-9169 to order.
6500 lb Deluxe Single Line Sling Lift Kit for Mounting pipe in center of Boat House "Go here to compare our lifts"
Kit includes:

• BH-65 6500 lb top of the line hoist with enclosed worm gear and extended worm gear assembly to stop deflection.110 volt 1 HP HEAVY DUTY Elite Motor with GFCI protection  LIFE TIME WARRANTY (GPA)

• 2 foot per minute lift speed

• 2 Galvanized Dual Pipe Supports Upgrade to the Eazy Mount pipe support/hoist hanger setup (mounts lift on 2 joists instead of 3) for $220, or Dual Pillow Block Pipe Supports with Pillow Blocks for $295.

• 4 Galvanized 1.5 Ton pulleys with ball bearings and grease zerk (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys. Upgrade to 3 ton blocks for $75.

• 4- 12" Galvanized Strap Hangers

• 1 set 4" x 14' (weighted) Polyester Slings Delete slings for a $120 deduction.

• 124 Ft Pre-Cut Galvanized 5/16" cable

• 8 drop forged cable clamps and 4 thimbles

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

WCPC 6500 Deluxe Cradle Lift $2,329.00 "Go here to compare our lifts" Call 318-286-9169 to order.
6500 lb Deluxe Single Line V-hull Cradle Lift Kit for Mounting pipe in center of Boat House

• BH-65 6500 lb top of the line hoist with enclosed worm gear and extended worm gear assembly to stop deflection.110 volt 1 HP HEAVY DUTY Elite Motor with GFCI protection LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• 2 Galvanized Dual Pipe Supports Upgrade to the Eazy Mount pipe support/hoist hanger setup (mounts lift on 2 joists instead of 3) for $220, or Dual Pillow Block Pipe Supports with Pillow Blocks for $295.
• 4 Galvanized 1.5 Ton pulleys with ball bearings and grease zerk (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys. Upgrade to 3 ton blocks for $75.
• 4 - 12" Galvanized Strap Hangers
• Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 7/16" 1.5 Ton Galvanized Shackles for easy Cradle Attachment
• 124 Ft Pre-Cut Galvanized 5/16" cable
• 8 drop forged cable clamps and 4 thimbles

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

WSPC 7500 Deluxe Sling Lift $2,329.00 Call 318-286-9169 to order.
7500 lb Deluxe Single Line Sling Lift Kit for Mounting pipe in center of Boat House "Go here to compare our lifts"
Kit includes:

• BH-75  7500 lb top of the line hoist With enclosed worm gear and extended worm gear assembly to stop deflection.110 volt 1.5 HP Elite Motor with GFCI protection LIFE TIME WARRANTY (GPA)

• 2 foot per minute lift speed

• 2 Galvanized Dual Pipe Supports Upgrade to the Eazy Mount pipe support/hoist hanger setup (mounts lift on 2 joists instead of 3) for $220, or Dual Pillow Block Pipe Supports with Pillow Blocks for $295.

• 4 Galvanized 3 Ton pulleys with ball bearings and grease zerk  (straight line, NO COMPOUNDING "Click Here to learn about Compounding" ) Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.

• 4- 12" Galvanized Strap Hangers  -Substitute 12" Aluminum Strap Hangers for $20

• 1 set  6"x 14' (weighted) Polyester Slings Delete slings for a $220 deduction.

• 124 Ft Pre-Cut Galvanized 5/16" cable

• 8 drop forged cable clamps and all hardware needed to install kit in boat house*

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. schedule 40 pipe for the cable to wrap around and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

Call or Text: 318-286-9169 Email: info@BoatLifts4Less.com
Monday thru Friday 9 to 5

 

• BH-75 7500 lb top of the line hoist With enclosed worm gear and extended worm gear assembly to stop deflection.110 volt 1.5 HP Elite Motor with GFCI protection LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• 2 Galvanized Dual Pipe Supports Upgrade to the Eazy Mount pipe support/hoist hanger setup (mounts lift on 2 joists instead of 3) for $220, or Dual Pillow Block Pipe Supports with Pillow Blocks for $295.
• 4 Galvanized 3 Ton pulleys with ball bearings and grease zerk  (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 4 - 12" Galvanized Strap Hangers  -Substitute 12" Aluminum Strap Hangers for $20
• 1 Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
• 4 5/8" 3.25 ton Galvanized Shackles for easy Cradle Attachment
• 124 Ft Pre-Cut Galvanized 5/16" cable
• 8 drop forged cable clamps and all hardware needed to install kit in boat house*

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions" and  "Go Here for Up-grades and Options"

• BH-85 8500 lb top of the line hoist With enclosed worm gear and extended worm gear assembly to stop deflection.110 volt 1.5 HP Elite Motor with GFCI protection LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• 2 Galvanized Dual Pipe Supports Upgrade to the Eazy Mount pipe support/hoist hanger setup (mounts lift on 2 joists instead of 3) for $220, or Dual Pillow Block Pipe Supports with Pillow Blocks for $295.
• 4 Galvanized 3 Ton pulleys with ball bearings and grease zerk (straight line, NO COMPOUNDING "Click Here to learn about Compounding") ) Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 4-12" Galvanized Strap Hangers -Substitute 12" Aluminum Strap Hangers for $20
• 1 set 6"x14' (weighted) Polyester Slings Delete slings for a $220 deduction.
• 124 Ft Pre-Cut Galvanized 5/16" cable
• 8 drop forged cable clamps and all hardware needed to install kit in boat house*

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" , "Go Here for motor and wiring instructions"and  "Go Here for Up-grades and Options"

• BH-85 8500lb top of the line hoist With enclosed worm gear and extended worm gear assembly to stop deflection.110 volt 1.5 HP Elite Motor with GFCI protection LIFE TIME WARRANTY (GPA)
• 2 foot per minute lift speed
• 2 Galvanized Dual Pipe Supports Upgrade to the Eazy Mount pipe support/hoist hanger setup (mounts lift on 2 joists instead of 3) for $220, or Dual Pillow Block Pipe Supports with Pillow Blocks for $295.
• 4-Galvanized 3 Ton pulleys with ball bearings and grease zerk (straight line, NO COMPOUNDING "Click Here to learn about Compounding") ) Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
• 4-12" Galvanized Strap Hangers -Substitute 12" Aluminum Strap Hangers for $20
• 1 Galvanized Boat Cradle with end plates for V-hull boats up to 12,000lbs, available in 9 or 10ft widths 6" beams (11 or 12ft for a additional $200)
• 4 5/8" 3.25 ton Galvanized Shackles for easy Cradle Attachment.
• 124 Ft Pre-Cut Galvanized 5/16" cable
• 8 drop forged cable clamps and all hardware needed to install kit in boat house*

• 1 year warranty on electrical components

• LIFE TIME WARRANTY on the boat hoist gear unit
  
  *Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.

• "Go Here for installation instructions" and  "Go Here for motor and wiring instructions