BH-USA Maintenance Free A-Drive boathouse lifts at www.BoatLifts4Less.com

"Go Here" to Return to Home Page
Monday thru Friday 9 to 5

2025 Wood mount Maintenance and Drip free drive system boathouse lifts with cradles or slings.
Featuring the Maintenance Free and No Drip A-Drive hoist and Dual Pillow Block pipe supports.

"Go Here" To see our other Boathouse Lifts "Go Here" To see the home Page.

Choose your lift here: 4,000 lb V-hull cradle lift - 4,000 lb Pontoon cradle lift - 7,000 lb V-hull cradle lifts - 7,000 lb Pontoon Cradle Lifts

WSPC-MF 4000 Deluxe Sling Lift with enclosed maintenance free A-Drive hoist $2,099.00 Call 318-286-9169 to order.
4,000 lb Deluxe Single Line V-hull Sling Lift Kit for Mounting pipe in center of Boat House
Kit includes:

4,000 lb enclosed A-Drive hoist 110 volt 1 HP Elite Motor with GFCI protection Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists. Sealed, no drip gear box!
2 Dual Pillow Block Pipe Supports with Pillow Blocks... No drip and never require re-greasing!
4 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
4 12" Galvanized Strap Hangers
1 set 4"x14' (weighted) Polyester Slings
124 Foot of Pre-Cut Galvanized 1/4" cable
8 drop forged cable clamps and all hardware needed to install kit in boat house*
1 year warranty on electrical components

*Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.
"Go Here for installation instructions" , "Go Here for motor and wiring instructions" and "Go Here for Up-grades and Options"

WCPC-MF 4000 Deluxe Cradle Lift with enclosed maintenance free A-Drive hoist $2,849.00 Call 318-286-9169 to order.
4,000 lb Deluxe Single Line V-hull Cradle Lift Kit for Mounting pipe in center of Boat House
Kit includes:

4,000 lb enclosed A-Drive hoist 110 volt 1 HP Elite Motor with GFCI protection Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists. Sealed, no drip gear box!
2 Dual Pillow Block Pipe Supports with Pillow Blocks... No drip and never require re-greasing!
4 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
4 12" Galvanized Strap Hangers
1 Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
4 7/16" 1.5 Ton Galvanized Shackles for easy Cradle Attachment
124 Foot of Pre-Cut Galvanized 1/4" cable
8 drop forged cable clamps and all hardware needed to install kit in boat house*
1 year warranty on electrical components

*Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.
"Go Here for installation instructions" , "Go Here for motor and wiring instructions" and "Go Here for Up-grades and Options"

WPPC-MF 4000 Deluxe Pontoon Cradle Lift with enclosed maintenance free A-Drive hoist $2,999.00 Call 318-286-9169 to order.
4,000 lb Deluxe Single Line Pontoon Cradle Lift Kit for Mounting pipe in center of Boat House
Kit includes:

4,000 lb enclosed A-Drive hoist 110 volt 1 HP Elite Motor with GFCI protection Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists. Sealed, no drip gear box!
2 Dual Pillow Block Pipe Supports with Pillow Blocks... No drip and never require re-greasing!
4 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys.
4 12" Galvanized Strap Hangers
1 Galvanized Pontoon Boat Cradle with end plates for Pontoon boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
4 7/16" 1.5 Ton Galvanized Shackles for easy Cradle Attachment
124 Foot of Pre-Cut Galvanized 1/4" cable
8 drop forged cable clamps and all hardware needed to install kit in boat house*
1 year warranty on electrical components

*Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.
"Go Here for installation instructions" , "Go Here for motor and wiring instructions" and "Go Here for Up-grades and Options"

WSPC-MF 7000 Deluxe Sling Lift with enclosed maintenance free A-Drive hoist $2,359.00 Call 318-286-9169 to order.
7,000 lb Deluxe Single Line V-hull Sling Lift Kit for Mounting pipe in center of Boat House
Kit includes:

7,000 lb enclosed A-Drive hoist 110 volt 1.5 HP Elite Motor with GFCI protection Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists.Sealed, no drip gear box!
2 Dual Pillow Block Pipe Supports with Pillow Blocks... No drip and never require re-greasing!
4 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys. Upgrade to 3 ton blocks for $75.
4 12" Galvanized Strap Hangers
1 set 6"x 14' (weighted) Polyester Slings Delete slings for a $220 deduction.
4 1/2" 2 ton Galvanized Shackles for easy Cradle Attachment
124 Ft Pre-Cut Galvanized 5/16" cable
8 drop forged cable clamps and all hardware needed to install kit in boat house*
1 year warranty on electrical components

*Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.
"Go Here for installation instructions" , "Go Here for motor and wiring instructions" and "Go Here for Up-grades and Options"

WCPC-MF 7000 Deluxe Cradle Lift with enclosed maintenance free A-Drive hoist $3,095.00 Call 318-286-9169 to order.
7,000 lb Deluxe Single Line V-hull Cradle Lift Kit for Mounting pipe in center of Boat House
Kit includes:

7,000 lb enclosed A-Drive hoist 110 volt 1.5 HP Elite Motor with GFCI protection Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists.Sealed, no drip gear box!
2 Dual Pillow Block Pipe Supports with Pillow Blocks... No drip and never require re-greasing!
4 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys. Upgrade to 3 ton blocks for $75.
4 12" Galvanized Strap Hangers
1 Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
4 1/2" 2 ton Galvanized Shackles for easy Cradle Attachment
124 Ft Pre-Cut Galvanized 5/16" cable
8 drop forged cable clamps and all hardware needed to install kit in boat house*
1 year warranty on electrical components

*Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.
"Go Here for installation instructions" , "Go Here for motor and wiring instructions" and "Go Here for Up-grades and Options"

SWCPC-MF 7000 Super Deluxe Cradle Lift with enclosed maintenance free A-Drive hoist $4,230.00 Call 318-286-9169 to order.
7,000 lb Deluxe Single Line V-hull Cradle Lift Kit for Mounting pipe in center of Boat House
Kit includes:

7,000 lb enclosed A-Drive hoist 110 volt 1.5 HP Elite Motor with GFCI protection Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists. Sealed, no drip gear box!
2 Dual Pillow Block Pipe Supports with Pillow Blocks... No drip and never require re-greasing!
GEM GR1 Remote Control
4 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys. Upgrade to 3 ton blocks for $75.
4 12" Galvanized Strap Hangers
1 Galvanized Boat Cradle with end plates for V-hull boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
4 Guide Posts with padded bumpers
4 1/2" 2 ton Galvanized Shackles for easy Cradle Attachment
Aluminum Cable Winders
100' Stainless steel 5/16" cable
8 Stainless steel drop forged cable clamps
4 Stainless steel thimbles
1 year warranty on electrical components

*Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.
"Go Here for installation instructions" , "Go Here for motor and wiring instructions" and "Go Here for Up-grades and Options"

WPPC-MF 7000 Deluxe Pontoon Cradle Lift with enclosed maintenance free A-Drive hoist $3,225.00 Call 318-286-9169 to order.
7000 lb Deluxe Single Line Pontoon Cradle Lift Kit for Mounting pipe in center of Boat House
Kit includes:

7,000 lb enclosed A-Drive hoist 110 volt 1.5 HP Elite Motor with GFCI protection Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists. Sealed, no drip gear box!
2 Dual Pillow Block Pipe Supports with Pillow Blocks... No drip and never require re-greasing!
4 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys. Upgrade to 3 ton blocks for $75.
4 12" Galvanized Strap Hangers
1 Galvanized Pontoon Boat Cradle with end plates for Pontoon boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
4 1/2" 2 ton Galvanized Shackles for easy Cradle Attachment
124 Ft Pre-Cut Galvanized 5/16" cable
8 drop forged cable clamps and all hardware needed to install kit in boat house*
1 year warranty on electrical components

*Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.
"Go Here for installation instructions" , "Go Here for motor and wiring instructions" and "Go Here for Up-grades and Options"

SWPPC-MF 7000 Super Deluxe Pontoon Cradle Lift with enclosed maintenance free A-Drive hoist $4,550.00 Call 318-286-9169 to order.
7000 lb Deluxe Single Line Pontoon Cradle Lift Kit for Mounting pipe in center of Boat House
Kit includes:

7,000 lb enclosed A-Drive hoist 110 volt 1.5 HP Elite Motor with GFCI protection Maintenance free and Up to 40% Faster lift speed than Flat Plate hoists. Sealed, no drip gear box!
2 Dual Pillow Block Pipe Supports with Pillow Blocks... No drip and never require re-greasing!
GEM GR1 Remote Control
4 Galvanized 1.5 ton pulleys with ball bearings and grease zerks (straight line, NO COMPOUNDING "Click Here to learn about Compounding") Ball bearings with a grease zerk reduce friction and out last bushing type pulleys. Upgrade to 3 ton blocks for $75.
4 12" Galvanized Strap Hangers
1 Galvanized Pontoon Boat Cradle with end plates for Pontoon boats up to 8,000lbs, available in 8, 9, 9.5, and 10ft widths 5" beams
4 Guide Posts with padded bumpers
4 5/8" 3.25 ton Galvanized Shackles for easy Cradle Attachment
Aluminum Cable Winders
100' Stainless steel 5/16" cable
8 Stainless steel drop forged cable clamps
4 Stainless steel thimbles
1 year warranty on electrical components

*Customer supplies 2"I.D. Schedule 40 pipe for the cable to wrap around, bunk boards and because of variances in wood thickness, the fasteners to attach components to the boathouse.
"Go Here for installation instructions" , "Go Here for motor and wiring instructions" and "Go Here for Up-grades and Options"

Up-Grades and Options for Boat Lifts 4 Less Boathouse Lifts
100 ft Stainless Steel Cable, Clamps and Thimbles (1/4" Cable)	$115
100 ft Stainless Steel Cable, Clamps and Thimbles (5/16" Cable)	$155
Pontoon Boat Brackets (2) for 3rd pontoon on tritoons	$220
Upgrade to 22 inch bunk brackets from 16 inch	$120
Wired for 220volt with 220volt GFCI up-grade	$20
GEM GR1 Remote for single motor	$598
Elite ER1 Remote for single motor	$398
Spring Switch	N/C
Solid Aluminum Cable Winders for 2 inch pipe.	$46 each
Guide Posts Brackets for Cradle for 4 to 5 inch I-beams, set of 4 (Stanchion without PVC Pipe and Padded Bumpers)	$250
Complete Guide Post kit for 4 and 5 inch beams with Brackets, PVC and 36" Padded Bumpers (With 16" bunk brackets or pontoon brackets only)	$510
12" x 12' Black All Weather Bunk Carpet	$17
6 lb Cable Weights	$35 each
10 lb Cable Weights	$60 each
Compounding Upgrade (galvanized cable, not weighted)	$290
Compounding Kit (weighted for sling kits)	$355

Call or Text: 318-286-9169 Email: info@BoatLifts4Less.com
Monday thru Friday 9 to 5